玻璃表面处理机

玻璃表面处理机

概述
本机是专用于玻璃表面处理,利用高频高压脉冲,使放电极间的空气电离,形成等离子体及流注放电。放电时因空气电离而产生臭氧,能有效地除去玻璃表面的油污;同时激发玻璃表面产生极性基团。从而增强油墨和粘合剂在玻璃表里面的渗透力和粘附力。

基本参数

◆ 电源电压:220V+10%                       ◆ 速 度:2-5M/min
◆ 电源频率:50Hz/60Hz                        ◆ 处理厚度:1-2mm
◆ 脉冲频率:15-40KHz                         ◆ 处理宽度:600mm
◆ 输出功率:2-3KW                              ◆ 设备占地约:L1500*W800
◆ 输出电压:7.5-15KV                          ◆ 可定制不同尺寸机台

Overview:  This machine is dedicated to the glass surface treatment, the use of high frequency high voltage pulse, so that the air between the discharge electrode ionization, plasma formation and streamer discharge. By ionizing air discharge ozone, the glass can effectively remove the oil surface; excitation glass surface while the polar group. Thereby enhancing the ink and the binder in the glass sheet inside the penetration and adhesion
Basic parameters:
◆ power supply voltage: 220V + 10%   ◆ Speed: 2-5M / min
◆  Power frequency: 50Hz / 60Hz           ◆  Power frequency: 50Hz / 60Hz
◆  the pulse frequency: 15-40KHz         ◆ handle width: 600mm
◆  the output power: 2-3KW                    ◆ the device occupies about: L1500 * W800mm
◆  the output voltage: 7.5-15KV             ◆ the machine can be customized in different sizes
44