AF(AS)微镀膜机

AF(AS)微镀膜机

3设备优势

(1)等离子清洁处理。内部采用自动化等离子处理装置,可实现成膜前对工件进行清洁及表面活化处理的作用,经过等离子清洁后的接触角在5-8°,让玻璃表面Si-O键更多的裸露出来,与膜层发生附和反应,提高膜层结合的牢固度,提升产品的抗老化性以及耐摩擦能力,降低工件本身附带的杂质,使喷涂镀膜品质更高(标配为单头,可选配双头或线性等离子处理)。

(2)采用原装进口纳米雾化系统,完全均匀雾化液体,提高产品喷涂的均匀性,降低膜层表面摩擦系数,增大膜层表面爽滑度。(标配为单头、可选配双头及三头配置)。

(3)自主研发高精度专用供液系统,0-40ml/min精确控制喷涂药量,非接触式供液,不会使药业质变(正阳专利产品,医疗级,精确度:±0.05ml/min)。

1

(4)PLC+人机界面控制,直观易操作;

(5)进口伺服系统驱动+封闭式无尘滑台导向,配以连续式传动轮传动(非皮带式传动),伺服系统使等离子系统以及雾化系统的工作高度、宽度等均可无极自动精密调节;无尘滑台确保整个工作运行平稳,低噪音且无粉尘二次污染;传动轮间隙与顶部FFU形成之上而下流通区,防止反溅影响产品背面。
(6)低能耗(正常生产功率约2-3KW/H),采用廉价气体(压缩空气),无需真空环境,生产成本低。

Equipment advantages:
(A) plasma cleaning. Internal automated plasma processing apparatus, the film formation can be achieved on the workpiece prior to cleaning and surface activation effect, and so the contact angle after the plasma cleaning in 5-8 °, so that the glass surface of the Si-O bond is more exposed, and film echoed reaction occurs, increase firmness film combination, aging resistance and abrasion ability to improve products and reduce impurities accompanying the workpiece itself, the spray coating of higher quality (standard single head, optional double or linear plasma treatment).

(2) use of imported nano atomization system, completely uniform atomized liquid spray to improve the uniformity of the product, reducing surface friction coefficient of the film, increasing the smoothness of the film surface. (Standard for single head, double and three optional configurations).

2

(3) self-developed high-precision machine systems for liquid, 0-40ml / min precise control of spray dose, non-contact for liquid medicine does not make a qualitative change (zhengyang patented products, medical-grade accuracy: ± 0.05ml / min).

(4) PLC + HMI control, intuitive and easy to operate;

(5) Imported servo drives + enclosed dust-free slide guide, together with the continuous transmission wheel drive (non-belt type transmission), the plasma system, servo system and the work of highly atomized system, width, etc. can be stepless automatic precision regulation; clean slide ensure that the entire work is running smoothly, low noise, no dust cut secondary pollution; drive wheel clearance over the top FFU formation under circulation area, to prevent the impact of the anti-splash back of the product.

(6) low-power (normal production power of about 2-3KW / H), the use of inexpensive gas (air), no vacuum, low production cost.

设备产能 Equipment capacity
未标题-2
注:以上产能计算根据根据单头标准机预估(传动速度以650mm/min为例);具体以实际生产为准。
Note: The above production capacity is calculated based on a standard single-head machine according to estimates
(transmission speed 650mm / min for example); specific to the actual production prevail.